|
Intelligent Reflective
Beam Detector |
The Intelligent Reflective
Beam Detector comprises a single unit that houses a transmitter,
receiver and control electronics.
The beam detector is available in two versions: a single reflector model
for distances of up to 50m and a four-reflector unit for distances of 50
to 100m.
For more information on the Intelligent Reflective Beam Detector, visit
the
Beam Detector
page.
To
download product literature, click
here.
|
|
|
|
|
Loop-Powered Beacon |
The Loop-Powered beacon is
a local-area beacon designed for indoor use. It can be connected to
detection systems using
XP95 or
Discovery detectors and control panels
with appropriate software.
The beacon uses LEDs, which are more reliable than xenon beacons, and is
lockable like a detector. It has a wide angle of visibility and can be
synchronised with each other and with Apollo
Sounders.
For more information on the Loop-Powered Beacon, visit the
Beacon
page.
To download product literature, click
here.
|
|
|
|
|
Intelligent Base Sounder |
|
The Intelligent Base Sounder builds on the
strengths of existing Apollo sounders and features:
• synchronisation of continuous and pulsed
tones
• multiple allocation of any address to sounders
• choice of two output levels: 85dB(A) or 92dB(A)
• for use with XP95 and Discovery
• loop powered
For more information on the Intelligent Base Sounder, visit the
Sounder page.
To download product literature, click
here. |
|
|
 |
|
Part
no: 45681-265 |
|
(shown with a detector fitted) |
|
Send
Message |
|
|
|
|
XPlorer Base Sounder |
|
The XPlorer Base Sounder is a local-area
sounder for indoor use. The sounder incorporates an XPlorer base into
which an XPlorer detector is plugged. A guaranteed sound output of
85dB(A) at 1 metre is achieved at a current consumption of only 3mA.
For more information on the XPlorer Base
Sounder, visit the
Sounder page.
To download product literature, click
here. |
|
|
 |
|
Part nos:
59000-607 with optical detector
59000-407 with heat detector
59000-417 with high temperature detector |
|
Send
Message |
|
|
|
Ancillary Base Sounder |
The Anciallary Base Sounder is a local-area
sounder designed for indoor use. It can be connected only to detection
systems using XP95 or Discovery detectors and control panels with
appropriate software.
A guaranteed sound output of 85dB(A) at 1 metre is achieved at a current
consumption of only 3mA
For more
information on the Ancillary Base Sounder, visit the
Sounder page.
To download product literature, click
here. |
|
|
 |
| Part
no: 45681-276 with XP95 |
| Optical
Detector fitted |
|
Send
Message |
|
|
|
XP95 Three Channel Input/Output Unit |
|
The XP95 Three Channel Input/Output Unit
provides three voltage-free, single pole, change-over relay outputs and
three monitored switch inputs.
The unit is designed to supervise one or more normally open switches on
each of the three inputs.
Available with built-in isolator.
For more information on XP95 Interfaces,
visit the
Interfaces page.
To download product literature, click
here. |
|
|
|
|
XP95 Mains Switching Input/Output Unit |
|
The XP95 Mains Switching Input/Output Unit
provides a voltage-free, single pole change-over relay output and a
monitored switch input.
The unit is designed to switch
machinery operating at 230V, thus obviating the need for an immediate
relay and a power supply.
For more information on XP95 Interfaces,
visit the
Interfaces page.
To download product literature, click
here. |
|
|
|
|
XP95 Zone Monitor with
Isolator |
|
XP95 Zone Monitor with
Isolator The XP95 Zone
Monitor with Isolator powers and controls the operation of a zone of up
to 20 Series 60/Series 65 Apollo fire detectors from a loop of XP95
analogue addressable detectors and interfaces.
For more information on XP95 Interfaces,
visit the
Interfaces page.
To download product literature, click
here. |
|
|
|
|
XP95 Output Unit with Isolator |
|
The XP95 Output Unit with Isolator
provides 2 voltage-free, single pole, change-over relay outputs
For more information on XP95 Interfaces,
visit the
Interfaces page.
To download product literature, click
here. |
|
|
|
|
XP95 Input/Output Unit with Isolator |
|
The XP95 Input/Output Unit with Isolator
provides two voltage-free, single pole, change-over relay outputs, a
single monitored switch input and an unmonitored, non-polarised opto-coupled
input. For more information on
XP95 Interfaces, visit the
Interfaces page.
To download product literature, click
here. |
|
|
|
|
XP95 Sounder Control Unit with Isolator |
|
The XP95 Sounder Control Unit with
Isolator is used to control the operation of a zone of externally
powered sounders and to report their status to Apollo-compatible
analogue control equipment.
For
more information on XP95 Interfaces, visit the
Interfaces page.
To download product literature, click
here. |
|
|
|
|
XP95 Switch Monitor with Isolator |
|
The XP95 Switch Monitor with Isolator is
designed to monitor the state of one or more single pole, volt-free
contacts connected on a single pair of cables and to report their status
to Apollo-compatible analogue control equipment.
For more information on XP95 Interfaces,
visit the
Interfaces page.
To download product literature, click
here. |
|
|
|
|
XP95 Switch Monitor Plus with Isolator |
|
The XP95 Switch Monitor Plus with Isolator
is designed to monitor the state of one or more single pole, volt-free
contacts connected on a single pair of cables and to report the status
to Apollo compatible analogue control equipment.
It has an opto-coupled
output for resetting a remote detector and a selectable delay, making it
suitable for monitoring flow switches. |
|
|
|
|
|
